Table of Contents
Advertisement
REMOTE CONTROL MODEL SC3820
TV AND VCR OPERATIONAL
NOTES
Some controls
on the remote, like PLAY and VOLUME
will
always operate the VCR or the TV. Whether
other keys
operate
the TV or the VCR depends
on the mode of the
remote control. For example,
OFF-ON
will turn the VCR ON
and OFF while the remote
control is in the VCR mode. It will
turn the TV ON or OFF while the remote control is in the TV
mode.
Some of the functions
provided
by this remote control may
not be part of your TV and/or VCR. You wiill not be able to
activate those functions
even though there is a control button
on the remote.
For example,
pressing
TIMER provides
direct
access to the Sleep Timer on many TVs. If your TV does not
have a Sleep Timer, pressing TIMER
has no effect.
PREPARATION
FOR USE
Batteries
are provided
with this remote, but you must install
them before using the remote.
INSTALLING
BATTERIES
When the effective
operating
range of your remote becomes
noticeably
shorter, replace the batteries with two (2) high
quality,
alkaline,
size AAA batteries.
1.
Remove
the
battery
compartment
cover,
PUSH
DOWN
tab and PULL
OUT from
top.
2.
Insert
new batteries
as indicated
in the diagram
inside
the compartment.
3.
Replace
the cover
by inserting
the tab on the bottom
of the
cover
into
its housing.
Snap
the
cover
into
position.
NOTES:
•
Be careful not to place heavy objects on top of the remote
control buttons. Prolonged accidental operation of the re-
mote control will shorten battery life.
•
If you do not use the remote control for a month or more,
remove the batteries. Battery leakage can cause damage to
the remote control.
•
Zenith is not responsible for damage caused by such battery
leakage.
2738-0
3 --3
Advertisement
Table of Contents
