Key Parts And Components; Choose The Proper Location; Clearances - LG WM0742HGA User's Manual & Installation Instructions

P RTS ND
U S
KEY PARTS AND COMPONENTS
Rnaddition to the special features and
components outHined in the Special Features
section, there are severaHother important
components that are referenced in this manual
_) ULTRAoCAPACUTY STAUNLESS STEEL DRUM
The ultraqarge stainHess steeHdrum offers extreme
durabiHity and is tilted to improve efficiency and
allow easier access for Barge items.
@
WATER CURCULATUON ,AND STEAM
The water circulation nozzHes spray the water,,'
detergent soHution directly onto garments for
super cHeaning performance. During LG's unique
high=efficiency STEAM cycles, the steam nozzle
injects fabrics with hot steam to gently remove
tough stains.
LEVELUNG FEET
Four leveling feet (two in the front and two in
the back) adjust to improve washer stability on
uneven floors.
_) DRAUN ACCr:SS PAN_:L
Provides access to the drain line and drain
pump filter.
Drain _.i
Hose !
Hot and Cold
Water Inlets
Rear of Washer
mnduded Accessories
Hot an
Water Hoses
Caps (4)
(for covering
shipping bolt holes)
8
h
Tie Strap
Elbow Bracket
shipping bolts and (for securing (for securing
adjusting leveling feet) drain hose)
drain hose)
iON [NST UCTiONS
CHOOSE THE PROPER LOCATION
WARNING
• Washer is heavy! Two or more people
are required when moving and unpacking
the washer. Failure to do so can result in back
or other injury.
• Store and install the washer where it will not
be exposed to temperatures bemow freezing
or exposed to outdoor weather conditions.
Failure to foHIow this warning can cause serious
injury, fire, electrical shock, or death.
• Property ground washer to conform with aH
governing codes and ordinances. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
To reduce the risk of emectric shock, do not
install the washer in humid spaces. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
The base opening must not be obstructed by
carpeting when the washer is installed on a
carpeted floor.
Do not remove ground prong. Do not use
an adapter or extension cord. Pmuginto a
grounded 3-prong outmet. Failure to follow this
warning can cause serious injury, fire, electrical
shock, or death.
Po wet Outlet
• The power outlet must be within 60 in. (1.5 m) of
either side of the washer.
The appliance and outlet must be positioned so
that the plug is easily accessible.
Do not overload the outlet with more than one
appliance.
The outlet must be grounded in accordance with
current wiring codes and regulations.
®Time=delay fuse or circuit breaker is
recommended.
NOTE: It is the personal responsibility and
obligation of the product owner to have a
proper outlet installed by a qualified electrician.
CLEARANCES
211/4"_
(54 cm)
1_293/4 ''_ 1_4"
(75,6 ore) (10 cm)
(129.5 cm)
1"-_1 _ 27" _ _-1"
(2,5 crn) (68.6 cm) (2,5 cm)
To ensure sufficient clearance for water lines and
airflow, aIHowminimum clearances of at least
1 in. (2.5 cm) at the sides and 4 in. (10 cm)
behind the unit. Be sure to allow for wall, door,
or floor moldings that may increase the required
cHearances.
Allow at least 24 in. (61.2 cm) in front of the
washer to open the door.
9