Steam Cycles; Cycle Setting Buttons - LG WM0742HGA User's Manual & Installation Instructions

USE US
STEAM CYCLES CYCLE SETTING BUTTONS
STEAM cycBes incBude the
SteamFresh
TM,
AHergiene
TM,
Sanitary,
BuBky/Large, Cotton/NormaB, and
Perm. Press cycBes. Adding the
Steam option to these cycBes
provides superior cleaning performance while
reducing energy and water consumption. By
using a hot steam spray from above and cooBer
water beBow, fabrics get the cBeaning benefits of
a super hot wash, without the energy usage or
potentiaB damage to fabrics.
TO Add STEAM tO a Standard Cycle:
Turn on the washer and turn the cycBe
seBector knob to seBect a cycBe with the
STEAM option.
O Press the STEAM button. The washer will
automatically adjust the cycle settings.
O Set any other desired options.
O Press the START/PAUSE button to start the
cycBe. The washer will start automatically.
CAUTION:
Do not touch the door during steam cycles,
The door surface can become very hot,
AHow the door mock to remease before
opening the door.
Do not attempt to override the door mock
mechanism or reach into the washer during a
steam cydeo Steam can cause severe burns.
iMPORTANT NOTES ABOUT STEAM CYCLES:
Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
Do not touch the door.
Using the SteamFresl7 "_Cycle
SteamFresh uses the power of steam alone to
quickly reduce wrinkles and odor in fabrics. It
brings new life to wrinkled clothes that have been
stored for an extended time and makes heavily
wrinkled clothes easier to iron. SteamFresh can
also be used to help reduce odors in fabrics.
TO USe the SteamFresl7 Cycle:
Turn on the washer and turn the cycle
selector knob to select the SteamFresh cycle.
@
O
Load up to 5 items and close the door.
NOTE: If there is any moisture inside the
drum, such as from a previous wash cycle,
wipe the drum dry with a towel before
adding clothes.
Press the STEAM button until the correct
number of items is shown in the display.
No other options need to be set.
Press the START/PAUSE button to start
the cycle.
After the SteamFresh cycle is complete,
the washer will tumble the clothes for up
to 30 minutes to prevent rewrinkling.
After removing clothes from the SteamFresh
cycle, they may feel slightly damp. Place
clothes on a hanger for at least 10 minutes to
allow them to dry.
The SteamFresh cycle is not recommended for
use with 100% cotton clothing.
Remove stains from clothing before using the
SteamFresh cycle; the high heat could cause
stains to set permanently.
Do not use SteamFresh with the following items:
wool, blankets, leather jackets, silk, wet clothes,
lingerie, foam products, or electric blankets.
Best results are achieved when articles are of
similar size and fabric type. Do not overload.
Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press the
button for that setting until the indicator light for
the desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
Selects the wash and rinse temperature
combination for the selected cycle.
Press the WASH/RINSE button until
the indicator light for the desired
setting is lit.
Your washer features a heating element to
boost the hot water temperature for Extra
Hot settings. This provides improved wash
performance at normal water heater settings.
Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
Warm rinses are regulated at approximately
86°F (30°0).
Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
In cold climates, a warm rinse makes the load
more comfortable to handle.
Cold rinses use less energy, and the rinse
temperature depends on the cold water at the
faucet.
SPIN SPEED
The washer drum spins at up to 1,200 RPM. This
extracts more water from clothes,
reducing drying time and saving
energy.
Press the SPIN SPEED button until
the indicator light for the desired setting is lit.
Some fabrics, such as delicates, require a slower
spin speed.
The Drain & Spin cycle:
The Spin Speed button also activates the Drain
& Spin cycle to drain the tub and spin clothes;
for example, if you want to remove clothes before
the cycle has ended.
SOIL LEVEL
Adjusts the selected cycle to allow more time for
heavily soiled clothes OFless time for
lightly soiled clothes. Press the SOIL
LEVEL button until the indicator light
for the desired setting is lit.
BEEPER
Press repeatedly to adjust the volume of
the beeper. You may turn the
end-of-cycle beeper on or off
with the BEEPER button.
25