Olympus STYLUS 830 Instruction Manual page 25

• When [H_3_]is selected, the following setting restrictions apply
• The flash mode can only be set to [_.] or [_)]
• [tSO] is fixed at [AUTO].
• [IMAGE QUAMTY] is limited to [2048 x 1536] and lower.
• [FINE ZOOM], [DIGITAL ZOOM] and [@] cannot be set
FINE ZOOM
............................. Zooming in on your subject without reducing image quality
OFF /ON
This function allows you to zoom up to 25x by combining the optical zoom and image cropping.
This function will not reduce the image quality since it dose not convert the data with fewer
pixels into the data with larger pixels
• The avai+abie zoom factor varies depending on the [IMAGE QUALITY] setting. This function
cannot be set when [IMAGE QUALITY] is set to [SHQ] or [HQ]
DIGITAL ZOOM .............................................................................. Zooming in on your subject
OFF /ON
The digital zoom can be used to take close-up shots with stronger magnification when
combined with optical zoom (Optical Zoom × Digital Zoom: maximum 28×)
• This function cannot be set when [FINE ZOOM] is [ON].
Optical zoom Digital zoom
Zoom bar
White area: The optical zoom area
Red area: The digital zoom area
EsP/r_ ..................................... Changing the area for measuring the brightness of a subject
ESP Meters the brightness at the center of the monitor and the surrounding area
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.
Only the center of the monitor is metered. Recommended for taking a picture
against strong back+ight.
AF MODE
.......................................................................................... Changing the focusing area
FACE The camera searches a face within the frame and focus on it.
DETECT
iESP The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
SPOT Focus selection is based on the subject within the AF target mark.
• Even when [FACE DETECT] is set, the faces may not be detected depending on the subject.
• When [FACE DETECT] is selected, [IMAGE QUALITY] cannot be set to [16:9].
c
o
-o
@
o
EN 25