Olympus STYLUS TOUGH-6000 Instruction Manual page 47

Operating during shooting mode (Example: Flash mode)
j_, Tap the right side of the camera body once.
®The flash modeselectionscreenis displayed.
Tap the right or left side of the camera body to select a
function.
3_ Tap the top of the camera body twice to confirm your
selection.
_ Tap the camera firmly using the pad of your finger.
_ When the camera is stabilized on a tripod for example, tap control
may not work properly.
_ To prevent dropping the camera when using tap control, strap the
camera to your wrist.
Operating during playback mode
When switched to playback mode by tapping the back of the
camera body once, the operations below can be used.
Display next image: Tap the right side of the camera once.
Display previous image: Tap the left side of the camera
once.
When tapping the camera's top
Start slideshow: Tap the top surface of the camera twice. (The slideshow will automatically
start for all images stored in internal memory or on the card, with [BGM] set to [OFF].)
Display next image daring a slideshow: Tilt the camera right or tap the right side of the
camera once.
Display previous image during a slideshow: Tap the left side of the camera once.
Stop slideshow: Tap the top surface of the camera twice.
Return to the shooting mode: Tap the back side of the camera once.
To adjust the tap control
j_, Select [CALIBRATE] in Submenu 2 and press the @ button.
Select the part to adjust with _ and press the @ button.
Select the [STR] setting with _1_ and press the _ button.
(4/Select the [INTVL] setting with _ and press the @ button.
_ Check the operation of the camera by tapping on the camera after making
the settings.
Turning off the camera sounds [_ SILENT MODE]
Activates the [SOUND SETTINGS] setting.
ON The electronic sounds (operating sound, shutter sound, warning sound) and playback
sounds are muted.
_ [SOUND SETTINGS] (p. 42)
E.