How To Use Ifit.com Cd And Video Programs; How To Connect Your Vcr - NordicTrack ADVENTURER User Manual

HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 15.
A. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into the AUDIO OUT jack on your VCR.
A
Jmo_
@ Audio Adapter
[]_ Cab,e
B. Plug one end of the audio cable into the jack on the
side of the TREKKER near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.
B
y_..........j ',
To use iFIT.com CD's or videocassettes, the
TREKKER must be connected to your portable CD
player, portable stereo, home stereo, computer with
CO player, or VCR. See HOW TO CONNECT THE
TREKKER TO YOUR CD PLAYER, VCR, OR COM-
PUTER on page 14. Note: To purchase IFIT.com
CD's or videocassettes, call toll-free 1-800-735-
0768.
Follow the steps below to use an iFIT.com CD or video
program.
a Insert the key fully into the console.
See GE'i-I'ING STARTED on page 10.
B Select the iFIT.com mode.
When the key is in-
serted, the manual
mode will be selected.
To use an iFIT.com CD
or video program, press
the iFIT.com button. The
indicator on the button will light.
[_'1 Insert the iFlT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD into
your CD player. If you are using an iFIT.com video-
cassette, insert the videocassette into your VCR.
L_ Press the PLAY button on your CD player or
VCR.
A moment after the button is pressed, your per-
sonal trainer will begin guiding you through the
program. Simply follow your personal trainer's
instructions. Note: If the Distance/Time display is
flashing, press the Start button or the Speed +
button on the Console. The TREKKER will not re-
spond to a CD or video program when the display
is flashing.
Dudng the CD or video program, an electronic
=chirping" sound will alert you when the grade
and/or speed of the TREKKER is about to change.
CAUTION: Always listen for the "chirp" and be
prepared for grade and/or speed changes. In
some instances, the grade and/or speed may
change before the personal trainer describes
the change.
16