Leveling The Dryer - LG DLGX5102V Owner's Manual

INSTALLATION INSTRU€TIONS
cLEARANcES (cont.)
IMPORTANT:If you are installing your dryer using an optional pedestal base or stacking kit,
please refer to Optional Accessories in this manual or to the instructions for your pedestal or
stacking kit before proceeding with the installation.
Recommended installation spacing for cabinet installation
[] For cabinet installation, with a door, minimum ventilation openings in the top of the cabinet
are required.
(17,8 cm)
7"*(17,8cm)
*Required spacing
**For side or bottom venting, 2" (5.1 cm)
spacing is allowed.
-T
olo
i
2815/ld_ 1 'q,-I I_ 29/32"4 I_F 1"
(12.7cm) (73.4 cm)(2.5 cm) (2.54 cm) (68.6 cm) (2.54 cm)
LEVELING THE DRYER
WARNING
To reduce the risk o fpersonal i njury, adhere toall industry recommended safety p rocedures
including theuseoflongsleeved g loves andsafety g lasses. Failure tofollow a ll o fthesafety w arnings inthis
manualcould result inproperty damage,personal i njury ordeath.
To ensure that the dryer provides optimal drying
performance, it must be level. To minimize
vibration, noise, and unwanted movement, the
floor must be a level, solid surface.
NOTE: Adjust the leveling feet only as far as
necessary to level the dryer. Extending the
leveling feet more than necessary can cause
the dryer to vibrate.
Leveling Feet
J
Position the dryer in the final location. Place
a level across the top of the dryer.
• All four leveling feet must rest solidly on the
floor. Gently push on the top corners of the
dryer to make sure that the dryer does not
rock from corner to corner.
Use an adjustable wrench to turn the leveling
feet. Turn clockwise to raise the dryer or
counterclockwise to lower it. Raise or lower
the leveling feet until dryer is level from
side to side and front to back.
Make sure that all 4 leveling feet are in firm
contact with the floor.
11