Control Panel - LG LFX28968SW Owner's Manual

HOWTO USE 25
Control Panel Features (continued)
Energy Saving @
The Energy Saving function disables the mullion
heater located on the refrigerator door in order to
conserve electricity. Press and hold the Energy
Saving button for three seconds to activate or
deactivate this function.
- (3 NOTE
Discontinue using the Energy Saving function
if excessive moisture begins to collect on the
oor mullion.
Press the LIGHT button, to turn on the
dispenser light. The indicator will appear on the
LED display.
Change Filter (_@
When the water filter indicator turns on, you
have to change the water filter. After changing
the water filter, press and hold the FILTER
button for three seconds to turn the indicator
light off. You need to change the water filter
approximately every six months.
Alarm _]))
When power is connected to the
refrigerator, the door alarm is initially set to
ON. When you press the ALARM button,
the display will change to OFF and the
Alarm function will deactivate.
When either the refrigerator or the freezer
door is left open for more than 60 seconds,
the alarm tone will sound to let you know
that the door is open.
When you close the door, the door alarm
will stop.
Control Lock [_3
The Control Lock function disables every other
button on the display.
When power is initially connected to the
refrigerator, the Lock function is off.
If you want to activate the Lock function to
lock other buttons, press and hold the Lock
button for three seconds or more. The Lock
icon wilt display and the Lock function is
now enabled.
To disable the Lock function, press and hold
the Lock button for approximately three
seconds.
--Z_ CAUTION
Display Mode (For Store Use Only)
The Display Mode disabies alt cooling
in the refrigerator and freezer sections
to conserve energy while on display in
a retail store. When activated, OFF will
display on the control panet.
To deactivate:
With either refrigerator door opened,
press and hold the Refrigerator and
Ice Plus buttons at the same time for
five seconds. The control panel will
beep and the temperature settings will
display to confirm that Display Mode is
deactivated. Use the same procedure
to activate the Display Mode.