Custom Settings; R: Reset; Beep - Nikon D40 Guide User Manual

Custom Settings are used to customize camera settings to suit
individual preferences. The following options are available when
Simple (the default option) is selected for CSM/Setup menu in
the setup menu (_ 80):
Option _ Option _
R Reset 74 4 Shootingmode 75
1 Beep 74 5 Metering 75
2 Focusmode 75 6 Nomemorycard? 75
3 AF-areamode 75
To display the following options, select Full for CSM/Setup menu:
Option _ Option
7 Image review 75 13 AEIock
8 Flashlevel 76 14 Built-in flash
g AF-assist 76 15 Autoofftimers
10 ISOauto 76 16 Self-timer
11 Q/Fn button 77 17 Remoteon duration
12 AE-L/AF-L 77
R: Reset
Select Yes to restore all Custom Settings to their default values.
See the Appendix (_ 113) for a complete list of default settings.
77
78
78
79
79
1 : Beep
At tile default setting of On, a beep will sound when tile camera
focuses in single servo AF (AF-S or when shooting stationary sub
jects in AF-A autofocus mode), while the releasetimer is counting
down in selfitimer and delayed remote modes (_ 33),or when a
photograph is taken in quick response remote mode (_ 33). The
beep will not sound when Off is selected. The current setting is
shown in the shooting information display: ;_ is displayed when
the beep is on, @ when it is off (_ d).
74 MenuGuide/CustomSettings