Indicators Displayed In I_1 (Auto) Mode - Nikon COOLPIX P500 User Manual

Indicators Displayed in I_1 (Auto) Mode
Shooting mode
is displayed in
I_1 (auto) mode.
Reduces the effects of
camera shake.
Shutter speed
([_70)
value q
memory indicator
Pictures are recorded to internal memory
(approx. 102 MB). When a memory card is
inserted, [] is not displayed and pictures are
recorded to the memory card.
Only when a memory
card is inserted, the
type of movie is
displayed for movie
recording (_157,164
,165).
Image quality/image size
The current image quality
(compression ratio)and image
size are displayed. The default
settings are _ (Normal) for
image quality and
!_ (4000x3000) for image size.
When the monitor has been turned off in standby mode to save power (the power-on lamp is
blinking) ([_]199), turn on the monitor again with one of the following operations.
- Press the power switch, the shutter-release button, the [] button or the • (_1_ I movie-
record) button, o
d)
- Rotate the mode dial.
[] Note on the Flash
When the flash is lowered, the flash setting is fixed at off and _ appears at the top of the monitor, In
situations where a flash is needed, such as in dark locations or when the subject is backlit, be sure to
raise the flash (_37),
[]
Functions Available in
a (Auto)
Mode
• The flash mode (_36) can be adjusted, serf timer (_39), focus mode (_40) and exposure
compensation (_43) can be applied,
• Press the MENUbutton to specify settings for the shooting menu options Image quality (_83)
and Image size (_84).
[] Vibration Reduction
• See Vibration reduction (_193) in the setup menu (_185) for more information,
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
29