Step 1 Turn The Camera On And Select 01 (Auto) Mode; Indicators Displayed In 01 (Auto) Mode - Nikon Coolpix S710 User Manual

Step
1
Turn the Camera On and Select
10
(Auto) Mode
Indicators Displayed in
0
(Auto) Mode
The indicators and photo info displayed during shooting and playback will turn off after
a few seconds
(t;E
120). When the monitor has turned off in standby mode to save
power, press the power switch or the shutter-release button to reactivate
it
(t;E
127).
~
Available Functions in
10
(Auto) Mode
In
0
(auto) mode, macro mode (~ 31) and exposure compensation (~ 32) can be applied and
pictures can be taken using the flash mode (~ 28) and self-timer (~ 30). Pressing the
MENU
button
in
0
(auto) mode allows you to set up the image mode
(~
95).
~
The vibration reduction I motion detection icon
Vibration reduction corrects camera shaking that commonly occurs when shooting with zooming or
at slow shutter speeds.
Motion detection increases the shutter speed in shooting still pictures to reduce the vibrations
when camera shaking or subject blurring is detected. (This function is not activated in the movie
mode.)
A description of each vibration reduction / motion detection icon is as follows.
• 4J: Vibration reduction (~ 123) is set to ON and the motion detection (~ 124) is set to AUTO
(default setting) on the setup menu
(~
114).
• ~: Vibration reduction is set to ON and the motion detection is set to OFF.
• Ib0"i:
Motion detection is set to AUTO and vibration reduction is set to OFF.
• No icon: Both vibration reduction and the motion detection are set to OFF.
• Turn vibration reduction off when using a tripod.
• In the shooting mode (~ 124) where motion detection is not activated,
4J
or
Ib O
"!)
is not
displayed regardless of the setting of the motion detection.
Shooting mode
I!I
displayed in
0
(auto) mode.
Internal memory indicator
Pictures will be recorded to internal
memory (approximately 42 MB).
When memory card is inserted,
u::J
is not displayed and pictures will be
recorded to memory card.
Vibration reduction / motion detection icon
When ~ is displayed, the effects of camera
shaking and blurred subjects are reduced.
Image mode
Display image size and quality set in the
image mode menu. The default setting is
~
Normal (4352
x
3264).
27