Removing
the
Battery
Before opening tile battery< harT_berirT_emorycard slot
cover, turn tile camera off (_23)
and confirm that tile
power-on lamp and tile monitor are off.
To eject tile battery, open tile battery-chamber/
memory card slot cover and slide tile orange battery
Btch in tile direction indicated by tile arrow (_), then
remove the battery while being careful not to remove the battery at an angle ((2}).
• The camera, battery or memory card may be hot immediately after using the
camera. Observe caution when removing the battery or memory card.
_1_
Notes
on Battery
• Be sure to read and follow
the warnings
of"For
Your Safety" (_ii)
thoroughly
before using the
battery.
• Be sure to read and follow
the warnings
for "The Battery"
(_21
O)thoroughly
before
using the
battery.
• If the battery
will not be used for an extended
period,
recharge
it at least once every six months
and run it fiat before returning
it to storage,
19