Flashing The Bios - Dell Studio Slim Service Manual

1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Reset the current CMOS settings:
a. Locate the 3-pin CMOS jumper (CLEAR_CMOS) on the system board (see
b. Remove the jumper plug from the CMOS jumper (CLEAR_CMOS) pins 1 and 2.
c. Place the jumper plug on the CMOS jumper (CLEAR_CMOS) pins 2 and 3 and wait approximately five seconds.
d. Remove the jumper plug and replace it on the CMOS jumper (CLEAR_CMOS) pins 1 and 2.
4. Replace the computer cover (see
5. Connect your computer and devices to electrical outlets, and turn them on.
Flashing the BIOS
The BIOS may require flashing when an update is available or when replacing the system board.
1. Turn on the computer.
2. Locate the BIOS update file for your computer at the Dell Support website at support.dell.com.
NOTE: For non U.S. regions, choose your country/region from the drop-down list at the bottom of the Dell support website and then locate the
BIOS update file for your computer.
3. Click Download Now to download the file.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
The File Download window appears.
5. Click Save this program to disk, and then click OK.
The Save In window appears.
6. Click the down arrow to view the Save In menu, select Desktop, and then click Save.
The file downloads to your desktop.
7. Click Close when the Download Complete window appears.
The file icon appears on your desktop and is titled the same as the download BIOS update file.
8. Double-click the file icon on the desktop and follow the instructions on the screen.
Back to Contents Page
Begin.
Replacing the Computer Cover).
Replacing the Computer Cover).
System Board Components).