Replacing The Media Card Reader - Dell Studio Slim Service Manual

1 optical drive
8. Align the shoulder screw of the optical drive with the slots in the optical drive bay.
9. Gently slide the optical drive till it snaps in place.
10. Connect the power and data cables to the optical drive.
11. Connect the power and data cables to the system board
12. Replace the front panel (see
13. Replace the computer cover (see Replacing the Computer Cover).
14. Connect your computer and devices to their electrical outlets, and turn them on.
NOTE: If you installed a new drive, see the documentation that came with the drive for instructions on installing any software required for the drive
operation.
Replacing the Media Card Reader
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Remove the front panel (see
4. Remove the optical drive (see
1 optical drive 2 spring clamp
5. Disconnect the FlexBay USB cable and the power cable from the back of the Media Card Reader and from the internal USB connector (F_USB5) on the
system board (see System Board
2 screws (4)
Replacing the Front Panel).
Begin.
Replacing the Computer Cover).
Replacing the Front Panel).
Replacing the Optical Drive).
3 Media Card Reader
Components).