Replacing The Drive Panel Insert - Dell Studio Desktop Service Manual

13. Replace the front panel (see
14. Replace the computer cover (see
15. Connect your computer and devices to electrical outlets, and then turn them on.
Removing the FlexDock Break-Away Metal Plate
Align the tip of a Phillips screwdriver with the slot on the break-away metal plate and rotate the screwdriver outwards to break and remove the metal plate.
Replacing the FlexDock Drive Inserts
NOTICE: To comply with FCC regulations, it is recommended that you replace the FlexDock drive insert whenever the FlexDock drive is removed from
the computer.
1. Remove the front panel (see
2. Gently press on the insert lever outward to release the lock.
3. Pull the FlexDock drive insert away from the front panel.
4. To replace the FlexDock drive insert, align the FlexDock drive insert in place.
5. Push the insert lever towards the front panel till it snaps in place.
1 front panel
3 FlexDock drive insert
Replacing the Drive Panel Insert
Align the drive panel insert along the edges of the empty slot of the FlexDock or CD/DVD drive and push the panel insert and push the panel insert until it locks
in place.
Replacing the Front Panel).
Replacing the Computer Cover).
Replacing the Front I/O Panel).
2 insert lever