Table of Contents
Advertisement
1
Mini-Card
Replacing the Mini-Card
CAUTION:
The connectors are keyed to ensure correct insertion. Use of excessive force may damage the connectors.
CAUTION:
To avoid damage to the Mini-Card, ensure that there are no cables or antenna cables under the Mini-Card.
1. Follow the procedures in
Before You
2. Align the notch on the Mini-Card with the tab in the system-board connector.
3. Insert the Mini-Card at a 45-degree angle into the system-board connector.
4. Press the other end of the Mini-Card down and replace the screw that secures the Mini-Card to the system-board connector.
5. Connect the appropriate antenna cables to the Mini-Card you are installing. The follwing table provides the antenna cable color scheme for the MIni-
Card supported by your computer.
Connectors on the Mini-Card
Antenna Cable Color Scheme
WLAN (2 antenna cables)
Main WLAN (white triangle)
white
Auxiliary WLAN (black triangle)
black
6. Replace the drive bay (see
Replacing the Drive
7. Replace the optical drive (see
8. Replace the top bracket (see
9. Replace the top cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
10. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
2
screw
Begin.
Bay).
Replacing the Optical
Drive).
Replacing the Top
Bracket).
Replacing the Top
Cover).
Hide quick links:
Advertisement
Table of Contents
