b. Replace the optical drive (see
c. Replace the top bracket (see
d. Replace the top cover (see
If you replaced the memory module in the bottom memory-module connector (DIMM2):
a. Replace the bottom cover (see
NOTE:
If the memory module is not installed properly, the computer may not boot.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
5. Connect your computer and all attached devices to electrical outlets, and then turn them on.
If the message appears stating that memory size has changed, press <F1> to continue.
6. Log on to your computer.
7. To verify that the memory is installed correctly:
®
Windows Vista
:
Click the Start button
Windows 7:
Click the Start button
8. Check the amount of memory (RAM) listed.
Back to Contents Page
Replacing the Optical
Drive).
Replacing the Top
Bracket).
Replacing the Top
Cover).
Replacing the Bottom
Cover).
® Control Panel® System and Maintenance.
® Control Panel® System and Security® System.