Boot Sequence - Dell Inspiron Zino HD 410 Service Manual

Displays the amount of processor Level 2 cache.
Processor L2 Cache
Indicates the amount of installed memory.
Memory Installed
Indicates the amount of available memory.
Memory Available
Indicates the frequency of installed memory.
Memory Speed
Indicates the type of installed memory.
Memory Technology
Standard CMOS Features
Displays current time in the format (hh:mm:ss).
System Time
Displays current date in the format (mm:dd:yyyy).
System Date
Displays the SATA drives connected to the SATA 1 connector.
SATA 1
Displays the SATA drives connected to the SATA 2 connector.
SATA 2
Displays the ESATA drives connected to the ESATA 1 connector
ESATA1
Displays the ESATA drives connected to the ESATA 2 connector
ESATA2
Advanced BIOS Features
CPU Feature
USB Device Setting
Advanced Chipset Features
Enabled; Disabled (Enabled by default)
Onboard Audio Controller
AHCTI; ATA (ATA by default)
SATA Mode
Enabled; Disabled (Enabled by default)
Onboard LAN Controller
Enabled; Disabled (Disabled by default)
Onboard LAN Boot ROM
Boot Device Configuration
Boot Settings
Configuration
Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives
Hard Disk Boot Priority
detected.
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Hard Drive by default)
1st Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (USB by default)
2nd Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (CD/DVD by default)
3rd Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Removable Dev. by default)
4th Boot Device
Removable Dev.; Hard Drive; CD/DVD; Network; USB; Disabled (Network by default)
5th Boot Device
Power Management Setup
Enabled; Disabled (Enabled by default)
Remote Wake Up
Power Off; Power On; Last Power State (Power Off by default)
AC Recovery
Enabled; Disabled (Disabled by default)
Auto Power On
0
Auto Power On Date
0:00:00
Auto Power On Time
BIOS Security Features
Press <Enter> to set the supervisor password.
Set Supervisor Password
No Access; View Only; Limited; Full Access (Full Access by default)
User Access Level
Press <Enter> to set the user password.
Set User Password
Setup; Always (Setup by default)
Password Check

Boot Sequence

This feature allows you to change the boot sequence for devices.
AMD Cool 'N' Quiet — Enabled; Disabled (Enabled by default)
l
Secure Virtual Machine Mode — Enabled; Disabled (Enabled by default)
l
USB Operation Mode — HiSpeed; FullSpeed (HiSpeed by default)
l
Fast Boot — Enabled; Disabled (Enabled by default)
l
Numlock Key — On; Off (On by default)
l
Keyboard Errors — Report; Do Not Report (Report by default)
l