Removing The Chassis Fan; Replacing The Chassis Fan - Dell Inspiron 560 Service Manual

Removing the Chassis Fan
CAUTION: Do not touch the fan blades when you are removing the chassis fan. This could damage the fan.
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Disconnect the chassis fan cable from the system board connector (see
4. Remove the two screws that secure the chassis fan to the chassis.
5. Slide the chassis fan towards the front of the computer and lift it out.
1 screws (2) 2 chassis fan
Replacing the Chassis Fan
1. Follow the procedures in Before You
2. Slide the chassis fan in place towards the back of the computer.
3. Replace the two screws that secure the chassis fan to the chassis.
4. Connect the chassis fan cable to the system board connector (see
5. Replace the computer cover (see
6. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Removing the Computer Cover).
Begin.
System Board
Replacing the Computer Cover).
System Board Components).
Components).