To The Owner; Contents Of Crate; Assembly - MTD OEM-190-823 Operator's Manual

SECTION 2: TOTHE OWNER
Model 823 42-inch two-stage snow thrower is designed for use on FastAttach,. Compatible Lawn Tractors and
Garden Tractors ONLY. It will NOT fit nor operate properly or safely on ANY other tractor.
SECTION 3: CONTENTS OFCRATE
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents
are listed below and shown below. Part numbers are shown in parentheses.
One Auger Housing Assembly w/Lower V-belt
One Undercarriage Assembly (packaged
separately w/Upper V-belt 754-0371A)
One Idler Assembly (packaged separately w/
Extension Spring 732-0594A)
One Idler Pulley (756-0627B) and Pin (650-0040)
(packaged separately w/Hair Pin Clip 714-0145)
One Lift Handle Assembly
One Upper Chute Crank Rod
One Chute Directional Support w/Tilt Lever
Four Cable Ties (725-0157)
Two Spare Shear Bolts (710-0890A)
& Hex Lock Nuts (712-0429)
One Cotter Pin (714-0507)
Two Self-adhesive Reflectors (730-3000)
One Upper V-belt (754-0481)
One Upper V-belt (754-0435)
For TractorsEquippedwith a 54-inch Deck
Idler Pulley
and Pin "----'_O
For Manual PTOTractors
Equippedwith a 38-
or 42-inch Deck
Upper Chute Crank Rod
/
Undercarriage Assembly
(w/Upper V-belt 754-0371A)
Upper V-belts (754-0435 & 754-0481)
Cotter Pin
Chute Directional
Support w/Tilt Lever
Cable Ties
\
Self-adhesive
Reflectors Lift Handle"
Assembly
Auger Housing Assembly
with Lift Linkage
Spare Shear Bolts I
& Hex Lock Nuts L _:_O4_'®