MTD 31A-2M1A729 Operator's Manual page 15

Maintenance
Lubrication
Lubricate the pivot points on the control handle and the
extension spring at the end of the control cable with a light
oil once every season and before the snow thrower is put into
storage at the end of the season.
0ff-SeasonStorage
If the snow thrower will not be used for 30 days or longer, follow
the instructions below.
1.
2.
Store the equipment in a clean, dry area.
If storing the snow thrower in an unventilated area,
rustproof the machine using a light oil or silicone to coat
the snow thrower.
3. Clean the exterior of the engine and the snow thrower.
SECTION 6 -- MAINTENANCE & ADJUSTMENTS
15