Table of Contents
Advertisement
Appendices
79
Appendix
E: Troubleshooting,
continued
A/V Reset
To reset audio and
While viewing the TV, press the
All Audio and Video settings are
(for all inputs)
video adjustments
for
control-panel
buttons ACTIVITY and
returned to the original factory
all inputs to the original
VOLUME DOWNat the same time for at
settings, including Listen To,
factory settings,
least two seconds.
Language, audio Balance,
Channel
To erase and
1.
While viewing the TV, press
Memorization
re-memorize channels
MENUto display the main menu.
on the ANT input.
2.
Navigate to the Initial> Channel
menu.
3.
Press ENTER.
4.
Highlight the reception mode,
e.g. Ant Air.
5.
Highlight Scan.
.
Press ENTER to start channel
memorization.
Lock Menu
To change your Lock
See the cutout page from Appendix A,
Allows establishment
of a new
Control=Panel
To re-enable the
Lock Release
control-panel
buttons
after activation of the
Control-Panel
Lock
Auto input
If the New Device
Sensing
for
Found screen does
HDMI
not appear when you
connect an HDMI
device.
Press and hold the ACTIVITY button
on the control panel for ten seconds.
If the TV is powered off, you can
now press the POWER button to turn
it on.
.
2.
.
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created.
To add
or delete individual channels, see
Initial > Channel
> Edit menu
instructions on page 45.
System
Reset
If the TV does not turn
Disconnect the HDMI device.
Delete the HDMI input in the
Inputs
> Name menu (see page
47).
Power on and connect the new
device.
The New Device Found screen
will display.
iMPORTANT:
Use this reset
only if other
troubleshooting
has been unsuc-
cessful.
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
Press and hold the POWER button on
the control panel for ten seconds.
TV Reset
To reset all consumer-
accessible settings
and all memories to
the original factory
Use TV Reset if the TV
can respond to con-
trois but TV behavior is
abnormal.
CAUTION:
All owner-
)erformed setups and
adjustments
will be
erased.
1.
While viewing the TV, press
MENUto display the TV main
menu.
2.
With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3.
READ THE ON=SCREEN
WARNING AND INSTRUC=
TIONS.
•
If you do not wish to use this
reset, press BACKor MENUto
back out.
If you do wish to use the
reset, press ENTER to erase
all memories and settings.
The TV will turn off. Power on the
TV and the green LED will flash
quickly for about one minute. The
changes you made most recently,
before using SYSTEM RESET,may
be lost.
The TV will start the initialization
process and then turn off.
Power on the TV and the front
green LED will start flashing.
All
memory and settings outlined in
this Owner's Guide will need to
be set again.
code.
Allows the control panel to be
unlocked if the remote control is
misplaced.
Hide quick links:
Advertisement
Table of Contents
