Using Tv Features - Mitsubishi LT-46153 Owner's Manual

3. Using TV Features 25
[]
ChannelView, Programs for the tuned channel are
fisted on right side of screen,
ChannelView
TM
shows memorized channels on the ANT
input. It displays channel names and program informa-
tion for digital channels as sent by broadcasters or your
local cable service provider (information may be incom-
plete). No program information is displayed for analog
channels.
Note: You must set the TV Clock (page 44) to receive
ChannelView listings for the current channel.
Using ChannelView
Selecting an Audio Output Device
1, Press MOREand then 9(AUDIO).
Press A to show the Speakers option. The Speak-
ers option will display only if there is a recognized
audio device on an audio or HDMI output.
3, Press I_ to select either AV Receiver, Head-
phones, or TV.
Adjusting an External Subwoofer
1, Play sample video or music containing low-fre-
quency bass sound.
Press MOREand then 9 (AUDIO). Use A V to
display the Subwoofer option.
3, With Subwoofer set to On, press ENTER to display a
slider for volume.
4, Press 4 I_ to adjust the subwoofer volume.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol's MORE> 9 (AUDIO)key or the Adjust > Audio >
Speakers menu.
Receive updates for a
digital channel.
1. PressAVto
highlight a channel
number.
2. Press the INF0 key
(the screen may
briefly go blank).
GUIDE
Display/hide ChannelView
listings from the ANT
input.
Scan channels one by one. Hold A or Y.
Scan channels quickly. Hold PAGE UP/PAGE DN
Jump to listings fora spe- 1. Enter the channel
cific channel, number.
2. Press ENTER.
See more of the program INF0
description for the current
channel (if available).
Tune to the highlighted ENTER
channel.
With a Standard TV Setup
• Recommended Method: Program theTV's
remote control for your A/V receiver and enable the
Audio Lock feature. See page 68.
Program the TV's remote control for your A/V
receiver and set the TV remote control's mode to
AUDIO. Return the control mode to TVto control the
TV.
Use the remote control that came with the A/V
receiver.
With HDMI Control (CEC-Enabled HDMI
A/V Receiver)
The TV's remote control may control some functions of
the A/V receiver. See Appendix C, "HDMI Control of
CEC Devices," page 74.
With NetCommand IR Control
153 Series. Set up NetCommand control of the A/V
receiver's volume functions in the Inputs > AVR menu.
The TV's remote will then control A/V receiver volume.
See page 59.