Mitsubishi LT-46153 Owner's Manual page 78

78 Appendices
TV Reset
Comparison Guide
You can resolve many common TV problems using
the reset functions described in the following table.
See also the troubleshooting suggestions later in this
appendix.
iMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from the ANT input, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings, if most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Format
When the picture
shape seems
incorrect, use
MORE>0 (FORMAT) to
change the shape of
the picture.
PerfectColor
TM
Reset
or
PerfectColorTM/
PerfecTint
TM
Reset (153
Series)
(for the single
input currently
being watched)
When the color
intensities seem out
of balance, use the
PerfectColor/PerfecTint
reset to reset the color
balances to the original
factory settings.
Both PerfectColor and
PerfecTint are reset at
the same time.
Press the MOREkey and then repeat-
edly press 0 (FORMAT) to cycle
through the available aspect ratios.
The last-used format for a signal
type is memorized for each input.
The next time the same input and
the same signal type is viewed,
the last-used format will be
=
While viewing the input to
be reset, press MENUand
go to Adjust > Picture + >
PerfectColor.
2. Press ENTER to display the
PerfectColor adjustment screen.
3. Press CANCEL to reset the colors.
All PerfectColodPerfecTint
sliders are reset to the original
center position. The PefectColor/
PerfecTint settings for other
i
inputs remain unchanged.
i
i
A/V Memory
Reset
(for the single
input currently
being watched)
When audio and/
or video settings for
a single input seem
incorrect, use A/V
Memory Reset to
return the input to
the original factory
=
=
3.
While viewing the input to reset,
press MENUand go to Adjust >
Reset.
Press ENTER to highlight the
Reset icon.
Press ENTER again to reset.
All Audio and Video settings
for the individual input are
reset except for the Listen To,
Language, audio Balance,
Closed Caption, and Advanced
Picture settings.
settings.