Mitsubishi VS-472R Owner's Manual page 37

6,
7.
8.
Press the SET button to set the channel number
to be locked.
To LOCK only one channel proceed to Step 8. To
LOCK an additional channel press the POSITION
button again. The display for the second channel
to be locked flashes. Press the SET button to SET
the second channel to be locked.
Press the LOCK button to conclude the CHANNEL
LOCK procedure. To confirm that the CHANNEL
LOCK is in operation, attempt to tune to the
locked out channels.
/o 0
LOCK 1 2 3 4
__
Select the channel
number.
LOCI( 1 2 3 4
lo ":z,_.-
t
SeLect another
channel number.
CH PRO6 POSIT0h SET
0 O
NOTE:
1. During the operation, if you do not press next key within 10 seconds, the on-screen
display disappears and the contents which have been set will be automatically canceled.
2. The lock condition is maintained permanently until canc'eling the channel LOCK.
3. When press the QUICK VIEW button after programming thE;channel lock, the channel can
be switched to the last one viewed but can not be siwtched to the locked channel again.
4. When the power on/off button is turned on with a locked ct" annel selected, TV selects the
next higher channel,
5. The channel lock function does not work until completing the channel lock program
correctly.
• If the procedure is not finished, the entire command for the channel lock will be
canceled.
Example: When the secret 4 digit code and at least one lock channel are not entered
respectively.
• When the indications of the "LOCK" mode are erased by channel LOCK button before
the procedure is finished, the entire command will also be neutralized.
32