Mitsubishi WS-65807 Owner's Manual page 42

Part II1: Setup
V-CHIP Menu: V-CHIP LOCK
V-CHIP LOCK
(Figure 1)
The V-CHIP LOCK allows you to Block or
Allow programs based upon rating signals
sent by the broadcasting station. The TV
comes from the factory with the V-Chip lock
in the Off setting. You can turn the lock
On within the V-Chip Menu. The default
setting is TV-PG, allowing only programs
rated TV-PG or lower. You can change
the blocking level to various TV or movie rat-
ings, lettered categories, and by time. After
changing channels or inputs, there may be
up to a 5 second delay before the V-Chip
lock takes effect. The V-CHIP button on the
remote control enables you to conveniently
turn the lock on or off.
Figure 1. V-CHIP LOCK
Entry to the V-CHIP LOCK
(Figures 2-3)
The first time you press the V-CHIP button
on the remote control, or select V-CHIP
LOCK from the MAIN menu, or after you
have canceled your passcode you will see
the screen shown in figure 2. Use the
number buttons on the remote control to
input a four-digit passcode, then press
ENTER. You can delete a character and
move back one space by pressing CANCEL.
You can exit without inputting a passcode by
pressing MENU or HOME. The next time
you press the V-CHIP button on the remote
control, or select V-CHIP LOCK from the
MAIN menu, you will see the menu screen
in figure 3.
Figure 2. First time entry to the V-CHIP LOCK
Figure 3. Re-entry to the V-CHIP LOCK