Advertisement
Available languages
Available languages
F|G.3
7. Attach the Leg Support (#7) to the Leg (pre-assembled)
using
three Bolts (#18) and three Washers (#19) per Leg. See FIG.3.
8. Repeat the steps above for the other legs.
NOTE: Please make sure that al! connections
are tight.
F|G.4
9. Attach the Apron Corner (#31) to the End Apron (#3) using two Screws (#15) per Apron Corner, See FIG.4.
10. Repeat the steps above for the other apron corners,
Advertisement
