Advertisement
Available languages
Available languages
ASSEMBLY
iNSTRUCTiONS
1. Find a clean, level place to begin the assembly of your Billiard Table. The table will be assembled upside down
and then turned over on its legs once the assembly completed. This game table is heavy, and turning it over will
require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list below.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
F|G.I
3. Attach the Wood Brace (#13) to the Leg - B (#5) using two Screws (#16) per Brace. See FIG.1.
4. Attach the Leg - A (#4) to the Leg - B (#5) using four Screws (#11) per Leg. See FIG. 1.
F|G.2
5. Attach the Leg Base (#6) to the Leg (pre-assembled)
using
three Screws (#12) per Leg Base. See FIG.2.
6. Repeat the steps above for the other legs.
/
/
Ji
4
Advertisement
