Advertisement
Care
and Cleaning
...............................................
Control Panel - clean with a soft, damp cloth.
Do not use abrasive substances.
Tumbler
- remove any stains (such as crayon,
ink pen or fabric
dye) with
an all purpose
cleaner.
Then
tumble
old towels
or rags
to
remove any excess stain or cleaning
substance.
Cabinet
- wipe off any marks with soap and water,
Use an appliance
wax once a year if desire&
Dryer
Exhaust
System
should be inspected
and
cleaned
once
a year to maintain
optimum
pertor-
mance. The outside exhaust
hood should be cleaned
more fi'equendy
to ensure proper operation.
(Refer to
the Installation
Instructions
for more information,)
Replacing
Drum
(select models)
Light .........................................
1) Unplug or disconnect
the dryer.
2) Carefully
remove
the bulb from
the top
center of the door opening by turning coum
terclockwise.
3) Replace
with a 7 watt, 120 volt candelabra
base bulb (7C7).
4) Reconnect
dryer to power supply.
Reversing
the Door .............................................
The dryer door is designed
with the flexibili-
ty to swing from left to right or from right to
left depending
on your
installation
needs.
Simply
follow these steps:
1) Remove
and
keep
hinge
& latch
hole
covers.
2) Rest dryer door on your knee.
3) Remove
4 screws from the door hinges.
4) Turn
door
upside
down
and support
on
your other knee.
5) Place a screw in the top hole of the upper
hinge first and tighten to position
the door.
6) Insert
a screw
in the lower
hinge
and
tighten.
7) Close and open door to check for proper fit of door in
the opening.
Adjust door if needed.
8) Insert and tighten remaining
screws,
9) Put hinge & latch hole covers in opposite
side.
HINGE
HOLE
COVERS
LATCH
COVER
8
Advertisement
