Setting The Timer - Maytag T2 Series User Manual

2. Press the appropriate number pads u ntil
thecorrect time ofdayappears inthe
display.
When e lectrical power issupplied orafter a
power i nterruption, the lastclocktime
before power was interrupted will f lash.
To recall the time ofday when a nother time
function isshowing, press t he Clock pad.
Clock t ime cannot bechanged when the
oven hasbeen programmed forclock c on-
trolled c ooking, self-clean ordelayed self-
clean.
SETTINGTHETIMER
Use to set and then signalthe completionof
a time periodup to 99 hoursand 59 minutes
(99:59).
Thetimer can be used independently of any
otheroven activityand can be set whilean-
other oven function is operating. THE
TIMERDOESNOT CONTROLTHEOVEN.
.
.
PressTimer pad.
> The indicatorword TIMER will flash
and "0HR:00" appears in the dis-
play.
Pressthe appropriatenumberpads until
the desirednumberof minutesor hours
and minutesappear in the display.
Example: To set the Timer for 5 min-
utes, press theTimer pad and the num-
ber 5 pad. The control will begin count-
down after a four second delay.
Example: To set the Timer for 1 hour
and 30 minutes, press the Timer pad
and the numbers 1,3,0 pads. The con-
trol will begin countdown after a four
second delay.
3. The last minuteof the countdownwill be
displayedas seconds.
.
At the end of thetime set, one long beep
will sound and "End" will appear in the
display. To changethe numberof timer
remindersignals,see below.
TO CANCEL:
1. Press and hold Timer pad for several
seconds.The time of day will reappear.
OR
2. PresstheTimer pad and the "0"number
pad. After a slight delay the time of day
will reappear.
NOTE: Pressing CANCEL pad to cancel
the timer will cancel ALL selected oven
functionsexcept the timer.
TIMERBEEPS
Youhavea choiceof three "end of timer"
remindersignals:
Option 1: One beep at the end of the timer
operation,then, one beep every30 seconds
for the next five minutes or until the
CANCEL pad is pressed.
Option 2: One beep at the end of the timer
operation,then, one beep every minute for
the next 12 hoursor until the CANCELpad
is pressed.
Option 3 (default option): One beep at
the end of the timer operation, then, no
other beeps.
SETTINGTHE TIMER BEEPS:
1. Press the Timer and CANCEL pads at
the same time and hold for severalsec-
onds.
A singlebeep will sound.
Displaywill show the indicatorword
TIMERand the currentoption- 1,2,
or3.
.
Pressthe appropriatenumberpad (1, 2,
or 3) to selectthe optionyou wish. The
current time of day will reappearin the
displayafter four seconds.
CLOCK CONTROLLED OVEN
COOKINGBEEPS
You havea choiceof three "end of timed
cook" remindersignalsfor programmed
cooking:
Option 1 (default option): Four beeps at
the end of cookingthen, one beep every 30
secondsfor the next five minutesor until the
CANCELpad is pressed.
Option 2: Fourbeepsat the endof cooking,
then, one beep everyminutefor the next 12
hours or until the CANCEL pad is pressed.
Option 3: Four beeps at the end of cook-
ing, then, no other beeps.
SETTINGCLOCK CONTROLLED
OVENCOOKINGBEEPS:
1. PressCook Time and CANCELpadsat
the same time and hold for severalsec-
onds.
A singlebeepwill sound.
Displaywill show the indicatorword
COOKand the currentoption- 1,2,
or3.
.
Press the appropriatenumberpad (1, 2,
or 3) to selectthe optionyou wish. The
current time of day will reappearin the
displayafter fourseconds.
CANCELCLOCK DISPLAY
If you preferthat the time of day not be dis-
playedwhenthe oven is not operating:
1. Press Clock and CANCEL pads at the
same time and hold for several sec-
onds. The time of day will disappear in
the display.
2. Press Clock pad to briefly recall the
time of day, if desired. The time of day
will appear in the display for four sec-
onds.
TO RESTORE:
Pressthe Clock and CANCEL padsat the
same time and hold for several seconds.
The time of day will reappearin the display.
7