Oven Cooking; Setting The Timer; Setting The Clock - Maytag AGR4400ADW Service Manual

Use Instructions
CGR1415AD*, CGR1425AD*, CGR3725AD*, CP31200AD*, CG31200AD*,
CG31400AD*, CP31600AD*, CG31600AD*, CG34800AD*)

Oven Cooking

Manual Clean Oven Control
(select models)
NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.
A BAKE
B BROIL
C TIMER
D CLOCK
E CANCEL
▲ (More) or
F
▼ (Less)
Using the Touchpads
• Press the desired pad.
• Press the ▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the ▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the ▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.

Setting the Clock

1. Press the CLOCK pad.
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
B–5
(Models CPR1100AD*, CGR1110AD*, CGL1100AD*,
A B
C
Use for baking and roasting.
Use for broiling and top browning.
Sets timer.
Use to set time-of-day clock.
Cancels all operations except timer
and clock.
Enters or changes time, oven
temperature. Sets HI or LO broil.
D E
2. Set the correct time of day using the ▲ or ▼ pads. If the
▲ or ▼ pad is not pressed within 30 seconds, the program
will cancel. Press the CLOCK pad and begin again.

Setting the Timer

The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the TIMER pad.
• 0:00 will light and the colon (:) will flash in
the display.
2. Press the ▲ or ▼ pad until the desired time is displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing operation is in
progress. (The colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. "0:00"
will appear in the display.
• If desired, press the CLOCK pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the BAKE or BROIL pads and the
current temperature setting will briefly reappear in the
display during a timing operation.
To cancel the timer operation:
Press and hold the TIMER pad for several seconds.
7
16023522
F
©2004 Maytag Services