Philips DVD623 Owner's Manual page 13

Hookups (cont'd) 13
Connecting to a TV and a two-channel Stereo
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Connect the supplied video cable to the yellow VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV's
VIDEO IN jack.
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the Stereo. Match the
cable colors to the jack colors.
Plug the power cords of the DVD Player, Stereo, and the
TV into an active power outlet. Press the POWER ON/OFF
button on the front of the DVD Player to turn on the DVD
Player.
Turn on the Stereo power and set your Stereo to the cor-
rect Audio In channel or sound source. Refer to the Stereo
owner's manual for details.
Turn on the TV power. Set the TV to the correct Video In
channel. See your TV owner's manual for details. Or, change chan-
nels at the TV until you see the DVD screen saver on the TV.
• If you prefer or need to use the
S-VIDEO or Y CB CRjacks
instead, see pages 11-12. You
only need one video connection
between the TV and the DVD
Player.