Philips DVD623 Owner's Manual page 11

Hookups (cont'd) I I
Connecting to a TV Only
TV has an S-Video In Jack
BaCk of TV
(example only)
®[]@®-
2
3
4
Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV's S-
VIDEO In jack.
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the TV. Match the cable
colors to the jack colors.
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
Turn on the TV power. Set the TV to the correct S-Video
In channel. See your TV owner's manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
• On the TV, the S-VideoIn jack
may be labeled Y/C,S-Video, or
S-VHS (super video).
• If your TV has a single Audio In
jack instead of separate left/right
Audio In jacks, you will need a
different audio cable. You need a
"splitter" audio cable to go from
the left/right AUDIO OUT jacks
of the DVD Player to the single
Audio In jack on your TV. See
your electronics retailer for
details.
• Set VIDEO OUTPUT to S-VIDEO.
Details are on page 34.