Playing A Disc - Philips SV2000 SVD100 Owner's Manual

Hide thumbs Also See for SV2000 SVD100:
Table of Contents

Advertisement

18 Playing a Disc
IAUDUO
c DI
Playing a DVD or an Audio CD
Before you begin...
Turn on the power of the TV, amplifierand anyother equipment
connected to the DVD Player.Make sure theTV and the stereo or
amplifier (if applicable) are set to the correct channel. Details are
on pages 8-12.
I
Press the POWER button to turn on the DVD Player.
"HELLO" will appear brieflyon the display panel.
2
Press the OPEN/CLOSE
button to open the Disc tray.
3
Place a Disc into the tray. Make sure the Disc is sitting proper-
ly Jn the correct
recess.
Some DVDs are recorded
on both sides. Make sure the side you
want to play is facing up. Or, if the DVD is recorded
on only one
side, place the Disc in the tray with the label facing up.
4
Press the PLAY button. The tray will close automatically, and
playbackwill begin at the first Chapter or Track of the Disc.
Or, you may press the OPEN/CLOSE button to close the tray, and
DVD playbackwill start automatically. ( You also may closethe tray
by gently pressing the Disc tray toward the DVD Player.)
If the DVD in the tray hasa menu, the menu may appearon the
screen instead.Details are on page 19.
With some Audio CDs, playback will not begin until you press the
PLAY button.
5
L
Press the STOP
button
to stop playback.
Remember,
this DVD Player
will play only certain
Discs.
See page six for details.
Insert a Disc.
A "No Feature"symbol
_may
appear at the bottom right of the TV
screen.Thissymbol means either the
feature you tried is not available on
the Disc, or the DVD Player can not
access the feature at this time.This
does not indicate a problem with the
DVD Player.
If a Disc is dirty or has scratches,the
pictures may appear distorted and
playback may stop. In such cases,
remove the Disc and turn off the
DVD Player.Disconnect the power
cord, then reconnect it. Clean the
Disc, then turn on the DVD Player
again and reinsert the Disc for play-
back.
When the DVD or CD light appears
on the display panel, the Disc is
loaded completely and is ready for
playback.

Advertisement

Table of Contents
loading

Table of Contents