Table of Contents
Advertisement
12 Hookups (cont'd)
ooeoo
.°°°o
Jtoo
ooQo
oooooQmooo
oooo
.B°ol
oooQ,
oooooo
oo.°ooo.ooeQoo
• too°
• JooQoo
otoooo
lot,
,ooo
• oooot,
,,ooo
• totoeooooo
Connectin_
to a TV and an Amplifier
with DiE_ital In._ut iacks, Mini-Disc
Deck or
Diu_ital Audio Tape Deck
• Use a coaxial digital audio cable (not supplied) for this connection.
• If the Disc is recorded in 5.I channel Dolby Digital Surround,you cannot dub the Disc in digital sound usinga
Mini-Disc or Digital Audio Tape Deck.
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player. D etailsare on pages38-39. If you playa DVD
when the settings are wrong, the sound will be distorted or you may damagethe speakers.
Back of TV
(example only)
I
Connect a coaxial digital audio cable to the COAXIAL
jack on the DVD
Player and to the COAXIAL
DIGITAL AUDIO
IN jack on the Amplifier.
2
Connect the supplied video cable (yellow) to the VIDEO OUT jack on the
DVD Player and to theVIDEO
IN jack on the TV. (Or, you may connect an
optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and to the S-
VIDEO IN jack on the T_.)
3
Plug in the Amplifier's
power
cord.Turn
on the Amplifier
and select the
Auxiliary
IN station.
During Disc playback,you will adjust the volume at the
Amplifier. See your Amplifier
owner's manual for details.
4
Plug in theTV's power cord.Turn on theTV
and set it to the Video In
channel (or S-Video In channel). This channelusuallyis located near channel
00. During Audio CD playback, y ou may checkthe status of the Disc on your TV
screen. During DVD playback,you will watch the program on the "IV.See your TV
owner's manual for details.
5
Plug in the DVD
Player's power
cord. Press the POWER
button
to turn
on the DVD Player. "HELLO"
will appear briefly on the DVD Player's display
panel.You should see the DVD logo on the TV. If you do not, check your connec-
tions and make sure theTV is on the correct channel.
Advertisement
Table of Contents
