Table of Contents
Advertisement
CABLE
WITH CONVERTER/
DESCRAMBLER
BOX OR SATELLITE
BOX
You cable system may require a converter box, or
if you use a satellite system, you will need a
satellite box. In each case, you must connect a 75
ohm coaxial cable (not supplied) from the cable
system wall outlet to the box, and another 75 ohm
coaxial cable from the box to the Antenna
terminal of your TV/VCR. See berow.
Satellite Box or
Cable Box (Not supplied)
From Cable System
or Satellite Dish
75-ohm Coaxial
II _
_r _
II
? 'eup
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TVNCR channel selector to the output
channel(3 or 4) of the cable or satellitebox.
2. Select the channel to be recorded or viewed
on the cable or satellite box.
1) Open the battery compartment
cover by
pressing the cover on the remote unit in the
direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment
in the direction indicated by the
polarity (+/o) markings.
3) Replace the cover.
audio/video output cables to
the AUDIO IN/VIDEO IN
L
jacks of your TV/VCR. Then
press the CHANNEL • or •
button until "AUX" appears
on the screen.
When usingan external input signal (another
VCR or video camera), connect the player's
AUX /
- 12-
EN
9K16
Advertisement
Table of Contents
