Sears LXU 304.44700000 Owner's Manual page 16

MANUAL CLOCK SETTING
Make sure:
• TVNCR power must be turned on.
In the example below, the clock is to be set to:
DATE May 1st, 2000
SETTING TIME 5:40PM
1 Select "SETTING CLOCK*'
Press the MENU button on
the remote control.
Press the PLAY/A or
STOP/_' button to point to
"SE'I'TING CLOCK".
Then, press the F, FWD/I=.-
button.
I _MEN U
TIMER pROGRAMMING
p_CTURE CONTROL
_- SETTSNG CL_K
CHANNEL SET UP
USERS SET UP
V-CHIP SET Up
LAI_GUA_E EI_GLIS_ /
CAPTION [O_F]
ZERO RETURN
TIME SEARCH
2 Select "MANUAL CLOCK
Press the PLAY/A or AUTO CLOCK[O.J
STOP/_' button to point to AUTOCLOCKC. IAUTOI
"MANUAL CLOCK SET". ,_MA,UALCLOCK SET
OST IOFFI
Then, press the F.FWD/I_
button.
3 Select the month
MANUAL CLOCK SET
Press the PLAY/A or
STOP/v button until your
desired month appears.
(Example: May --_ 05)
Then, press the F.FWD/I_
button.
MCt_TH DAy YEAR
t#5 t
HOUR MINUTE
4 Select the day
Press the PLAY/A or
STOP/_" button until your
desired day appears.
(Example: 1st -_ 01)
Then, press the FFWDAI_
button.
MANUALCLOCKSET-
MON_ OAY YEAR
HOUR MINUTE
Select the year
Press the PLAY/A or
STOP/v button until your
desired year appears.
(Example: 2000)
Then, press the F.FWD/I_
button.
MANUAL CLOCK SET
05 / 01 MOfJ2000
HOUR MINUTE
6 Select the hour
Press the PLAY/A or
STOP/v button until your
desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/ll,-
button.
MONTH DAy YEAR
05 / 01 MON2000
HOUR M{NUTE
g5 : - p
"7 Select the minute
Press the PLAY/& or
STOP/v button until the
desired minute appears.
(Example: 40)
-MANUALCLOCKSET-
05 / 01 MON2000
NOUR MINUTE
O5 _0pM
8 Start the clock
Press the MENU button on
the remote control.
Although seconds are not
displayed, they begin
counting from 00 when you
press the MENU button on
the remote control Use this feature to
synchronize the clock with the correct time.
NOTE: When unplugging the AC cord or if there
is a power failure for more than 30 seconds, you
may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD/I_ or REW/_I button.
3) Enter correct numbers using the PLAY/_. or
STOP/T button.
4) Press the MENU button on the remote control
to start the clock.
NOTE:
if there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the F.FWDAI_ or REW/_I button to turn
[OFF] this function. Then you can manually adjust
the clock.
- 16- EN
9K16