Table of Contents
Advertisement
TO RECORD A SCRAMBLED/UNSCRAM-
BLED CHANNEL
1. Set the TV/VCR/DVD channel selector to the out-
put channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
2.Select the channel to record on your Cable
Converter Box or Satellite Box.
Note to CATV system installer:
This reminder is provided to call the CATV sys-
tem installer's attention to Article 820-40 of the
NEC that provides guidelines for proper ground-
ing and in particular, specifies that the cable
ground shall be connected to the grounding sys-
tem of the building as close to the point of cable
entry as practical.
CONNECTING TO EXTERNAL
INPUT JACKS
When you watch a program recorded on another
source (VCR, video camera or video game), use the
audio/video input jacks on the front of the
TV/VCR/DVD.
Connect the audio/video output jacks of another
source to the AUDIO L/R and VIDEO jacks of this
TV/VCR/DVD.
Then press the CHANNEL button K or L until
"AUX" appears on the screen.
NOTE:
•
When you connect a monaural VCR (another
source) to this TV/VCR/DVD, connect the Audio
output jack of the monaural VCR (another source)
to the AUDIO L jack of this TV/VCR/DVD. The
audio will output in both L and R channel equally.
To the audio
output jacks
[Another source]
Audio/Video
cable
(not supplied)
etc.
To the video
output jack
All manuals and user guides at all-guides.com
VIDEO
L
AUDIO R
HEADPHONE
[Front of the
TV/VCR/DVD]
[Fig. 5]
- 12 -
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
EXTERNAL INPUT MODE
When using an external input signal (another VCR,
video camera or video game), connect the player's
audio/video output cables to the
AUDIO L/R IN/ VIDEO IN jacks
of your TV/VCR/DVD. Then press
the CHANNEL button K or L until
"AUX" appears on the screen.
AUX
EN
1C29
Advertisement
Table of Contents
