Table of Contents
Advertisement
12
Parental Lock
Set restrictions for using Internet services. Also set the password accompanying the usage restrictions.
! Upon shipment from the factory, the password is set to "0000".
Important
When the INTERNET RADIO, PANDORA or FAVORITES input is selected, the setting made here cannot be
reflected.
1
Select 'Parental Lock' from the Network Setup menu.
2
Input the password.
Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
3
Specify whether to turn Parental Lock on or off.
! OFF – Internet services are not restricted.
! ON – Internet services are restricted.
4
If you want to change the password, select Change Password.
In this case, the procedure returns to step 2.
Port Number Setting
On this receiver, there can be up to 5 numbers of ports where signals are received.
1
Select 'Port Number Setting' from the Network Setup menu.
2
Select the port number you want to change.
3
Input the port number.
! Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
! It is not possible to set the same port number more than once.
4
If there are other port numbers you want to change, repeat steps 2 and 3.
Note
! We recommend setting the port number to 00023 or within the range of 49152 to 65535.
! When the port number is changed, network communications between the receiver and AVNavigator are no
longer possible. In this case, click Settings on the AVNavigator's function menu, select the IP Address tab and
input one of the port numbers set on the receiver side to enable communications with AVNavigator.
Checking the Network Information
The setting status of the following network-related items can be checked.
! IP Address – Check the IP address of this receiver.
! MAC Address – Check the MAC address of this receiver.
! Friendly Name –
Friendly Name
on
page
90.
1
Press
on the remote control, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
2
Select 'Network Information' from the Home Menu.
Display the setting status of the network-related items.
MHL Setup
Select whether or not to switch the input automatically to the MHL input when an MHL-compatible device is
connected.
! Default setting: ON
1
Press
on the remote control, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
! Press HOME MENU at any time to exit the Home Menu.
2
Select 'System Setup' from the Home Menu, then press ENTER.
3
Select 'MHL Setup' from the System Setup menu.
4
Select the 'Auto input switching' setting you want.
Note
This is only valid for MHL-compatible devices supporting this function.
The Other Setup menu
The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.
1
Press
on the remote control, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
2
Select 'System Setup' from the Home Menu.
3
Select 'Other Setup', then press ENTER.
4
Select the setting you want to adjust.
If you are doing this for the first time, you may want to adjust these settings in order:
! Auto Power Down – Sets the power to turn off automatically when the receiver is not being used
! Volume Setup – Sets up the volume-related operations of this receiver
! Remote Control Mode Setup – Sets this receiver's remote control mode
! Software Update – Use to update the receiver's software and check the version
! ZONE Setup – Use to make the sub zone-related settings
! On Screen Display Setup – Sets whether or not to display the status on the display when the receiver is oper-
ated
(page
94).
! Play ZONE Setup – Select the zone for playing the audio contents of devices in the home network
! Maintenance Mode – This is used to receive maintenance from a Pioneer service engineer or custom
installer
(page
94).
5
Make the adjustments necessary for each setting, pressing RETURN to confirm after each
screen.
91
The System Setup and Other Setup menus
(page
92).
(page
92).
(page
92).
(page
93).
(page
92).
(page
94).
Advertisement
Table of Contents
