Egg Whip Assembly & Use; Citrus Press Assembly & Use - KitchenAid KFPW760QER0 Instructions And Recipes Manual

12 cup food processors
Hide thumbs Also See for KFPW760QER0:
Table of Contents

Advertisement

Preparing
the Food Processor
for Use
Egg Whip
Assembly
and
Use
The egg whip is designed
to whip
egg whites or heavy cream to create
toppings
or soft meringues.
For the
best results, at least 1 cup of heavy
cream or 3 egg whites should
be
whipped
at a time. Whipping
smaller
quantities
may not result in maximum
volume.
To assemble:
The egg whip consists of 4 pieces -
the egg whip stem, stem cover, whip
paddle,
and cap.
--
Cap
Stem
Cover
Whip
Paddle
!
Stem
1. Place the egg-whip
stem on the
power shaft. Slowly turn the stem
until it drops fully onto the shaft.
2. Align the L-shaped notch on the
whip
paddle with the small post
on the stem cover, and slide the
paddle onto the cover. Turn slightly
to lock paddle.
3. Fit the stem cover and paddle over
the egg whip stem. Push
downward
to engage the ridges of
the stem with the gears of the
paddle.
4. Fit the egg whip cap over the egg
whip stem. Push downward
to
lock it into place.
5. Place the work bowl cover on the
work bowl with the feed tube just
to the left of the handle. Make
sure the center pin of the egg
whip fits into the center opening
of the cover. Grasp the feed tube
and turn the cover to the right to
lock it into place. Insert the pusher
into the feed tube. The egg whip
is now ready to operate.
6. Press the On Button
and whip
ingredients
to the desired texture
and volume.
Press the Off Button
when finished.
To disassemble:
1. Unplug
the base from the
electrical
outlet. Remove the work
bowl cover with a clockwise turn.
2. LiR the egg whip
assembly off the
power shaft. Remove whipped
ingredients
from the work bowl.
3. Pull the cap from the egg whip
assembly. Push downward
on the
stem pin to remove stem from the
stem cover. Turn the egg whip
paddle to unlock, and slide the
paddle from the stem cover.
Citrus
Press Assembly
and Use
1. Position and lock the work bowl
on the base.
2. Place the strainer basket in the
bowl with the locking clip to the
left of the work bowl handle.
3. Turn the basket counter-clockwise
until the clip locks into the handle.
11
Continued
on next page

Advertisement

Table of Contents
loading

Table of Contents