KitchenAid KSSC42QMS02 Use & Care Manual page 7

Side by side built-in refrigerator
Hide thumbs Also See for KSSC42QMS02:
Table of Contents

Advertisement

Available languages

Available languages

Adjusting Digital Controls
NOTE: Wait at least 24 hours between adjustments.
Recheck the
temperatures
before other adjustments are made.
To adjust
set point temperatures:
Press the refrigerator or freezer PLUS (+) or MINUS (-) key
pad until the desired temperature
is reached.
Wormer
REFRIGEqATOR
(2:)
Colder
NOTE: The set point range for the freezer is -9°F to 9°F (-23°C to
-13°C). The set point range for the refrigerator is 32°F to 46°F
O°C to 8°C).
CONDITION/REASON:
"TEMPERATURE
ADJ USTM ENT:
REFRIGERATOR too cold
REFRIGERATOR Control 1°
Not set correctly for conditions
higher
REFRIGERATOR too warm
REFRIGERATOR Control 1°
lower
High use or room very warm
FREEZER too cold
FREEZER Control 1° higher
Not set correctly for conditions
FREEZER too warm/too little
FREEZER Control 1° lower
ice
High use or heavy ice use
Additional
Digital Control
Panel Features
Additional features are located on the control panel at the top of
the refrigerator compartment.
WATER FILTER Status & Reset
NOTE: Do not use with water that is microbiologically
unsafe
or of unknown quality without adequate disinfection before
or after the system.
The water filter display will help you know when it is time to
change your filter. To change the filter, see the "Water Filtration
System" section.
INDICATOR:
STATUS:
99 percent
New filter installed
10 percent
Order replacement filter
0 percent or flow decreases
Replace filter
After replacing the water filter, press RESET and hold for 2
seconds to change the water filter display to 99 percent.
WATER FILTER
PERCENT LEFT
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily warm room temperatures.
Press MAX COOL to turn on the Max Cool feature. The Max
Cool indicator light will remain on for 24 hours unless
manually turned off.
NOTE: The temperature display will not change. After 24 hours,
the refrigerator returns to the previous temperature set points.
Over Temperature
Reset
The Over Temperature feature is designed to let you know when
either the refrigerator temperature
rises above 48°F (9°C) or the
freezer temperature
rises above 15°F (-9°C) for longer than
11/2hours. The audio alarm will shut off automatically
when the
temperature returns to normal, but the indicator light will continue
to flash to let you know that an over temperature condition has
occurred.
IMPORTANT: If the Over Temperature Alarm activates, your food
may spoil. See the "Power Interruptions"
section for more
information and minimize door openings until temperatures return
to normal.
Press OVER TEMPERATURE RESET to turn off the audio
alarm and flashing indicator light,
qll Over
@Temperature
The Over Temperature feature will continue to activate every
11/2hours until refrigerator and freezer temperatures
are
below 48°F (9°C) and 15°F (-9°C), respectively.
Holiday
Mode
The Holiday Mode feature is designed for the traveler who wishes
to save additional energy or for those whose religious
observances
require turning off the lights and ice maker. By
selecting this feature, the temperature set points remain
unchanged, the ice maker will be disabled and the interior lights
will turn off.
Press HOLIDAY MODE to turn on the Holiday Mode feature.
This feature will remain on until the Holiday Mode key is
pressed again.
_oltday
@
NOTE: If the Max Cool feature has been selected prior to
turning on the Holiday Mode feature, then the set points will
remain at 32°F (0°C) and -10°F (-23°C) for the refrigerator and
freezer compartments
until the Max Cool feature times out.
The refrigerator will then return to the previous temperature
set points.
Call Service
If the Call Service indicator light is flashing, call for service. See
the "Assistance
or Service" section for information on calling for
service.
Call Service

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents