Caring For Your Navman; Troubleshooting - Navman s-series Hardware User Manual

Caring for your Navman

Taking good care of your Navman will ensure trouble-free operation and reduce the risk of damage to your Navman:
Keep your Navman away from excessive moisture and extreme temperatures.
Avoid exposing your Navman to direct sunlight or strong ultraviolet light for extended periods of time.
Do not place anything on top of your Navman or drop objects on your Navman.
Do not drop your Navman or subject it to severe shock.
Do not subject your Navman to sudden and severe temperature changes. This could cause moisture
condensation inside the unit, which could damage your Navman. In the event of moisture condensation, allow
the Navman to dry out completely before use.
The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen
protectors designed specifically for use on portable devices with LCD panels may be used to help protect the
screen from minor scratches.
Never clean your Navman when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of
your Navman.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly, modification or
any attempt at repair could cause damage to your Navman and even bodily injury or property damage and will
void any warranty.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your
Navman, its parts or accessories.

Troubleshooting

If you encounter a problem you cannot solve, contact an authorized service centre for assistance.
Problems
Power does not turn on when using
battery power.
Screen responds slowly.
Screen freezes.
Screen is hard to read.
Cannot establish a connection with a
computer.
Solutions
The remaining battery power may be too low to operate your Navman.
Charge the battery using the in-car charger, home charger (sold
separately) or USB cable, then try again.
The remaining battery power may be too low to operate your Navman. If
the problem still persists, reset your Navman.
Reset your Navman.
Increase the screen brightness.
Ensure that your Navman and your computer are both turned on before
trying to establish a connection.
Make sure that the cable is securely plugged into the USB port on your
computer and on the Navman. Connect the USB cable directly to your
computer, not a USB hub.
Reset your Navman before connecting the USB cable. Always disconnect
your Navman before you restart your computer.
15