«km/h» for speed units, then distance is displayed in «km». Set offset lets you adjust the S300 to display local time The date is displayed to ensure that time adjustments are made in the correct direction, i.e. both correct time and correct date should be displayed.
Page 2
(12hr) edit set (31-12) edit beep edit set units (km/h) edit set offset S300 S300 — Settings editing details set 12hr set (12hr) set 24hr set 31-12 set (31-12) set 12-31 beep ON beep beep OFF set units (km/h)
(You may need to adjust the settings to display your local time.) Timer shows session time The timer starts automatically whenever you start moving and stops whenever you stop moving. Press and hold to shut down the S300 S300 S300 — Modes «OFF»...
Page 4
� Odometer � edit ZONE Zone OFF Clock � Timer � S300 S300 — Modes operating details clear all session data* clear all session data* clear max speed only clear odometer only accept Zone OFF Zone OFF Zone ON accept �...
D-ring clockwise to seal. Fit the S300 The S300 is designed to be worn on the left upper arm. You may wish to adjust some of the settings prior to fitting. Be outdoors...
For details about system settings see over page or consult User Guide. Press and hold to leave setup After leaving setup, the S300 automatically starts normal operation displaying the speed mode first. S300 (as shown above) are pressed...
Start normal operation Press to start normal operation When starting directly into normal operation S300 will start in the mode it was in at last shutdown. The S300 automatically operates whenever you are moving and pauses operation while you are stationary. Modes are...