SET UP for Input Signals
NOISE REDUCTION
Note:
NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.
SYNC
This function operates only during input from PC IN terminal.
Select SIGNAL from the "SET UP" menu during Component input signal.
Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input ¿ rst is selected.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "SYNC ON G".
40
Press to select "NOISE REDUCTION".
Press to select "OFF", "AUTO", "MIN", "MID", "MAX".
AUTO: NOISE REDUCTION will be automatically
selected from "MIN", "MID" or "MAX".
Press to select the "SYNC".
Press to adjust.
(
)
NOISE REDUCTION
SIGNAL
SYNC
AUTO
3 : 2 PULLDOWN
OFF
XGA MODE
1024
OFF
[ RGB ]
×768