Setup Of Screensaver Time; Wobbling - Panasonic TH-42LF25U Operating Instructions Manual

Setup of SCREENSAVER Time

After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".)
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
• "SCREENSAVER DURATION" of the "STANDBY AFTER SCR SAVER" can
be set from 0:00 to 23:59. When this is set to "0:00", "STANDBY AFTER SCR
SAVER" will not be activated.
Note: Timer function will not work unless "PRESENT TIME OF DAY" is set.

WOBBLING

Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
1
2
3
Notes:
• If "MULTI DISPLAY SETUP" is set to "ON", this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
SCREENSAVER (For preventing image retention)
Press to select START TIME / FINISH TIME (When TIME OF
DAY is selected).
Press to select SHOW DURATION / SAVER DURATION (When
INTERVAL is selected).
Press to select SCREENSAVER DURATION (When STANDBY
AFTER SCR SAVER is selected).
Press to setup.
button: Forward
button: Back
Press to display the SET UP menu.
Press to select "WOBBLING".
Press to select "ON" or "OFF".
ON: Shifts the position of the display image on a ¿ xed time
.
interval
Press to exit from adjust mode.
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
TIME OF DAY
MODE
6 : 15
START TIME
12 : 30
FINISH TIME
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
INTERVAL
MODE
12 : 00
SHOW DURATION
3 : 00
SAVER DURATION
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
STANDBY AFTER SCR SAVER
MODE
SCREENSAVER DURATION 6 : 15
SET UP
SIGNAL
SCREENSAVER
INPUT LABEL
WOBBLING OFF
COMPONENT/RGB-IN SELECT
RGB
POWER MANAGEMENT
ON
NO SIGNAL POWER OFF
ENABLE
NO ACTIVITY POWER OFF
DISABLE
STANDBY SAVE ON
ECO
OFF
ENGLISH ( US )
OSD LANGUAGE
1/2
31