Blind Stitch - Pfaff select 1520 Instruction Manual

H/D 5-
1540
5-
- /H
1530
5-
1520 - /H
Blind stitch (Model 1540)
Blind stitch H is best suited for invisible hems;
sewing by hand is no longer necessary.
• Serge the edge of the hem
• Fold the edge inwards by the hem width.
• Now unfold the hem again so that the hem
edge protrudes by about 1 cm
• Place the fabric under the sewing foot so
that the crease line runs along edge guide
B.
• Using the needle positioning knob 28,
select the needle position to the right
• When the needle enters the crease line, it
must only pick up one fi ber of the fabric.
Blind stitch (elastic)
Stitch D (1540) or H (1530/1520) is a blind
stitch for woven or elastic materials. The hem
is sewn and overcast at the same time.
Utility stitches and practical sewing
1-2 3-5 0/3
1-2
3-5 0/3
1-2
3-5 0/3
B
Remember!
When blind stitching, if you select a needle
position other than right,
other than 5, make sure the needle does not
strike the bar of presser foot 3.
If the stitches are visible on the right side,
adjust edge guide B by turning adjusting screw
A.
Use the needle position
dial (27) to regulate the penetration of the
needle in the crease.
.
Stitch H (1540)
Stitch D (1540), stitch H (1530/1520)
A
and stitch width
and the width
25