Advertisement
—
Machine s memory
—
Use this function to access the stitch selection of the machine or to call tip the machine's memory.
Front card dnve
Use this function to access the front card drive.
Rear card
drive
Use this funciton to access the rear card drive.
End to end mirroring
With thi5 function, you can mirror a design end to end. The mirrored design then appears on the screen for further
processing.
Side to
side
mirroring
With this function, you can mirror a design side to side. The mirrored design then appears on the screen for
further processing.
Trouble shooting , e.g. thread breakage
÷
With this function you can open a window showing troubleshooting functions to remedy problems that may occur
during embroidenng. e.g. thread breakage.
I
Stitch number
Use this function to open a window for entering a stitch number to which the embroidery hoop moves after the
confirmation.
j
Advance /Reverse stitch by stitch
*
4
.
With this function you can advance/reverse stitch by stitch. nciuding across a change of color,
Advance /Reverse design by design
Within an embroidery combination, use this function to advanceíreverse the embroidery hoop design by design.
-'-'
Advance /Reverse color by color
Use this function to move the embroidery hoop to the start of the previous/next color within a design. The color
appears in the icon.
Start of color
This positions the needle at the start of the current color.
The color is displayed in the con. The window s automatically opened n case of thread breakage.
Cross-ha ir cursor
This switches on a cross-hair cursor, which shows you the current needle position
Changing the
color
With this function, you open a wtndow for processing the color segments further.
The window Is sub-divided into ttiree helds n which you can make changes.
If you confirm your input, this command affects all
3
tields and the window is closed.
Top field I Select color segment
1
In tils field you can select a color segment In oroer to change it. To do this, mark the color segment that is to be
charged using the cursor icons Only the selected color segment is displayed.
2. You can setect a color segment in order to sew o iy this segment. To do this, press The foot control after
marking the color.
f you set tle cursor to M The machine embroiders oil areas In the same color.
Middle field / Change color
In ths tied v'u can use the cursor keys to mark the color to whch you would ltke to change the selected color
segment.
Bottom field I
Color intensity
In this held, you can adjust the shade of a color of the selected segment with the cursor keys
Enlarged represen tation
'J'th
this funtion. ou btatn an enlarged ropresentatton of the destgn on The screen, as upon destgn seiecton. By
touchng esc' you switcn back to the previous screen, without saving the changes.
Advertisement
