Advertisement
More functions for Alphabets
By touching this con you can call up further functions for processing or modifying the characters or the word sequence.
Touch the icon a further time to close the window
End to end mirroring
With this function you can mirror letters and sequences end to end. It appears on the screen for
further
processing.
Side to side mirroring
With this function, you can mirror letters and sequences side to side. Each stitch is mirrored individually. The mirrored
stitch then appears on the screen for further processing.
Tie-off program
A window is opened for tying off your word sequences. automatically cutting the thread and raising the presser foot.
Tie-off is automatically activated as standard setting.
You can specfy .n the selection that the machine is to tie off at the start, or at the start and end of the stitch. Touch
the corresponding icon.
If you have activated tie-off at the end, you can specify that the machine is to cut the threads and then raise the
presser foot.
If you have activated "Tie-off at end", use the reverse button to determine the length of the seam.
Tie-off at start
By selecting this function you specify that the start of the stitch is tied off with four stitches.
Tie-off at end
By selecting this function you specify that the end of the stitch is tied off with four stitches.
Thread cutter
By touching this con, you can specify that the machine is to cut the needle thread and bobbin thread at the start
or at the end of the seam automatically.
Singie stitch:
Word sequences can be sewn as single stitches.
You can also define a number of word sequences as a single stitch.
To-off is automatically performed at the start and end.
You can determine the number of repeats via the +1-
icons.
Balance
Ths function allows you to open a window for correcting the word sequence.
D'alooue window: You can move the displayed word sequence
!fl
the direction of the arrow using the
+.
-
icons Use a
sewn specimen ror reference. The word sequence is automatically corrected.
Twin needle
This function reduces the width of the stitch so that a twin needle can be used
This function should be switched off for this function. Remove the twin needle from the macnine.
Advertisement
