Olympus VH-210 Instruction Manual page 40

Selecting the camera sound and its Selecting the camera sound and its
volume [Sound Settings] volume [Sound Settings]
d (Settings Menu 1)  Sound Settings
Submenu 2 Submenu 3
Sound Type 1/2/3
OFF (No Sound)
Volume or 5 levels of
volume
OFF (No Sound)
q Volume
or 5 levels of
volume
Adjusting the CCD and the image Adjusting the CCD and the image
processing function [Pixel Mapping] processing function [Pixel Mapping]
d (Settings Menu 2)  Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
40 EN
To adjust the CCD and the image To adjust the CCD and the image
processing function processing function
Press the Q button when [Start] (Submenu 2) is
displayed.
Application
Choose the sound
made by camera
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
controls.
[ [ s s ] ]
Choose the volume
of the sound
made by camera
controls.
Adjusts the image
Bright/Normal
playback volume.
●
The camera checks and adjusts the CCD and the
image processing function at the same time.
d (Settings Menu 2)  s
Submenu 2
Selects the monitor brightness
depending on the surrounding
brightness.
Application