Opel Automobile Owner's Manual page 7

Raising and lowering the tipper
The tipper is operated using the
remote control located on the seat
base.
The remote control enables the user
to supervise the operation of the
tipper from outside the vehicle.
The remote control is magnetic and
can be stored on the seat base when
not in use.
1. With the isolation switch activated,
depress the switch on the
remote control to raise; or the
switch to lower. The tipper can be
stopped at any time by releasing
the switch.
2. The tipper body will cease moving
automatically when it reaches
maximum height.
An acoustic signal will sound to
indicate when the tipper control is
activated.
Tipping to the rear
Fully insert locking pins into the left
and right-hand rear pivots, ensuring
the handle and locator are facing up.
Tipper
Rotate the locking pin away from the
upright position to ensure the pin is
secured.
Tipping to the side
To tip to the left side, fully insert
locking pins into the front and rear
left-hand pivots. Ensure the handle
and locator on both locking pins are
facing up. Rotate both locking pins
away from the upright position to
ensure the locking pins are secured.
1-5
Back to overview